Description
The DGW-521 is a communication gateway between the Modbus RTU/DCON and the DALI (Digital Addressable Lighting Interface) protocols, and allows a Host PC, PAC, or TouchPAD to access DALI devices by providing three interfaces that enable conversion from RS-232/RS-485/USB to DALI. The module provides a built-in DALI power supply that can be enabled or disabled via a switch. DALI is an international standard for lighting control interfaces, and is suitable for DALI lighting systems covering small areas. The maximum length of the DALI signal cables cannot exceed 300 m.
Features
- Conversion between RS-485/RS-232/USB and DALI Interfaces
- Easy Deployment: The ID Code can be written by the RS-485 Interface
- Simplified Wiring Process
- Built-in DALI Power can be enabled or disabled using a Switch
- 1500 VDC Isolation
- ±4 ESD Protection for the RS-232/485/USB Data Line
- ±4 kV EFT Protection and ±2 kV Surge Protection for Power Line
- DIN-Rail Mounting
- Wide Operating Temperature Range: -25 °C ~ +75 °C
Specifications
Interface | ||
DALI | Connector | 2-pin Terminal Block |
Baud Rate (bps) | 1200 bps | |
Isolation | 1500 VDC | |
Built-in DALI power | DC 16 VDC ± 5%, max. current 250 mA (Enabled/Disabled via a switch) | |
UART | COM Port | RS-485/RS-232 |
Connector | 3-pin Terminal Block(D+, D-, GND)/TxD, RxD, GND), Jumper Selectable | |
Baud Rate (bps) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 | |
Protocol | DCON, Modbus RTU | |
USB | Connector | USB Type B |
Transmission Speed | 12M bps | |
Specification | USB 1.1 and USB 2.0 standard compatible | |
OS Support | Windows XP (32/64-bit), Windows 7 (32/64-bit) | |
Protocol | DCON and Modbus RTU via Virtual COM port | |
LED Indicators | ||
System LED Indicators | PWR/RUN/ERR LED | |
EMS Protection | ||
ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal, ±8 kV Air for Random Point | |
EFT (IEC 61000-4-4) | ±4 kV for Power Line | |
Surge (IEC 61000-4-5) | ±2 kV for Power Line | |
Power | ||
Power Supply | Unregulated +10 VDC ~ +30 VDC | |
Connector | 3-pin Terminal Block | |
Protection | Power reverse polarity protection, Overvoltage brown-out protection | |
Power Consumption | 6 W | |
Mechanical | ||
Casing | Plastic | |
Flammability | Fire-Retardant Materials (UL94-V0 Level) | |
Dimensions (L x W x H) | 107 mm x 72 mm x 57 mm | |
Installation | DIN-Rail Mounting | |
Environmental | ||
Operating Temperature | -25 °C ~ +75 °C | |
Storage Temperature | -30 °C ~ +80 °C | |
Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
Technical
DGW-521 Serial/USB-DALI Gateway module datasheet
Applications