Description
The GW-7557 Gateway acts as a slave device using the PROFIBUS DP protocol. It allows a PROFIBUS master to access the HART slave devices. These HART slave devices may be a transmitter, an actuator, a current output device and so forth. Utility software is included to aid in configuration of the GW-7557 so that HART slave devices can be easily added into a PROFIBUS network.
Features
Protocol & Hierarchy
|
DP-V0 Slave
|
Supports PROFIBUS Transmission Rate (kbps)
|
9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
|
Transmission Rate Setting
|
detected automatically
|
Max Input Data Length
|
240 Bytes
|
Max Output Data Length
|
240 Bytes
|
Address Setting
|
0~126 set by DIP switch or EEPROM
|
Supports HART Mode
|
point-to-point / multi-drop
|
Support HART Master
|
Allow two HART Masters
|
Support HART Channel
|
4 channels
|
Support HART Frame
|
Short/Long frame
|
Support HART modules
|
Connecting up to 15 HART modules
|
Support HART Burst mode
|
YES
|
Indicators
|
PWR, ERR, and RUN LEDs
|
Network Isolation Protection
|
2500 Vrms High Speed iCoupler
|
DC Isolation Protection
|
3000 VDC on PROFIBUS side
|
Specifications
Hardware
|
|
CPU
|
80186, 80 MHz or compatible
|
SRAM/Flash/EEPROM
|
512 KB / 512 KB / 16 KB
|
Watchdog
|
Watchdog IC
CPU built-in |
ESD Protection
|
4 kV class A
|
PROFIBUS Interface
|
|
Controller
|
Profichip VPC3+C
|
Transceiver
|
ADI ADM2486
|
Connector
|
9-pin female D-Sub
|
Baud Rate (bps)
|
9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
|
Transmission Distance (m)
|
Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
|
Isolation
|
3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
|
Protocol
|
DP-V0
|
HART Interface
|
|
HART Interface
|
8-pin screwed terminal block
|
HART Channel
|
4 channels
|
UART Interface
|
|
COM
|
RS-232
|
COM Connector
|
3-pin screwed terminal block (RxD, TxD, GND)
|
Baud Rate (bps)
|
Up to 115200
|
Data bit
|
7, 8
|
Stop bit
|
1, 2
|
Parity
|
None, Even, Odd
|
LED
|
|
Round LED
|
PWR LED, RUN LED, ERR LED
|
POWER
|
|
Power supply
|
Unregulated +10 ~ +30 VDC
|
Protection
|
Power reverse polarity protection, Over-voltage brown-out protection
|
Power Consumption
|
2.0 W
|
Mechanism
|
|
Installation
|
DIN-Rail
|
Dimensions
|
72 mm x 33 mm x 119 mm (W x L x H)
|
Environment
|
|
Operating Temp.
|
-25 ~ 75?
|
Storage Temp.
|
-30 ~ 85?
|
Humidity
|
5 ~ 95% RH, non-condensing
|
Technical
GW-7557 Profibus DP to HART Gateway Datasheet
Applications
-
Industrial Automation
-
Factory Automation
-
Process Automation