I-2533CS-FD CAN/CAN-FD to Single-Mode Fibre Optic Bridge

The I-2533CS-FD is a local CAN/CAN FD (CAN with Flexible Data-Rate) bridge used to establish a connection between two CAN bus systems via single mode fibre optic transmission medium. In order to solve the problem between CAN/CAN FD and fibre transmission, the I-2533CS-FD is specially designed for converting the electrical CAN/CAN FD bus signal to fibre optic cables.

The I-2533CS-FD has three more important features.
1. Transmission distance limitation of the CAN bus system will not affected due to the different CAN/CAN FD baud rate. It means that the total CAN/CAN FD bus working distance can be extended.
2. Bus error on one CAN/CAN FD network will not affect the operation of another CAN/CAN FD network.
3. Two CAN/CAN FD network can communicate with each other by using different CAN/CAN FD baud rate for greater flexibility.

• Compatible with the ISO 11898-2 standard
• Compatible with CAN specification 2.0 A/B and FD
• CAN FD support for ISO and Non-ISO (Bosch) standards switchable
• CAN FD bit rates for data field from 100 kbps to 10000 kbps
• CAN bit rates from 10 kbps to 1000 kbps
• Fiber broken line detection
• Support CAN Bus message filter configuration
• Support firmware update via USB
• Basic CAN message routing function via Group ID settings.
• Built-in switchable 120 ohm terminal resistor for CAN Bus
• Dip switch for CAN/CAN FD baud rate configuration

I-2533CS-FD CAN/CAN-FD to SIngle Mode Fibre converter datasheet