I-7011P Thermocouple I/P Module (1AI + 1DI +2DO)

This Thermocouple Input module is ideal where only a single temperature (or voltage or current) needs to be monitored.

It also has an integral Digital Input channel to accept an input from a switch/relay or similar, along with 2 Digital Outputs which can be used for Alarm Output.

• 16 bit ADC
• 3000V dc inter module isolation
• Integrated digital input and output
• Event counters
• Autonomous alarm output
• Direct measurement of thermocouples, voltage and current
• Cold Junction Compensation for thermocouples
• Can be Configured using simple ASCII Commands

Analog Input

• Resolution: 16 bits
• No of inputs: 1 differential
• Input Type: DC voltage, 0-20mA, T/couple
• Sampling Rate: 10 Hz
• Input Ranges: +/-15mV, +/-50mV, +/-100mV, +/-500mV, +/-1V, +/-2.5V, +/-20mA (with optional 125R resistor)
• Thermocouple ranges 
  J= -210ºC to +760ºC 
  K= -270ºC to +1372ºC 
  T= -270ºC to +400ºC 
  E= -270ºC to +1000ºC 
  R= 0ºC to +1768ºC 
  S= 0ºC to +1768ºC 
  B= 0ºC to +1820ºC 
  N= -270ºC to +1300ºC 
  C= 0ºC to +2320ºC
  L = -200ºC to +800ºC
  M = -200ºC to +100ºC
• Accuracy = 0.05%
• Common Mode Rejection = 150dB
• Input Impedance = 20M Ohms

Digital Input

• Channels = 1
• Logic 0 = +1V max
• Logic 1 = +3.5V to +30V
• Max. Input Frequency = 50Hz
• Min. Pulse Width = 1ms

Digital Output

• Channels = 2
• Output Type = Sink, Open collector to 30V
• Output Load = 30mA max. per channel
• Power Dissipation = 300mW

Other

• Interface = RS485
• Format : N,8,1
• Baud Rate : 1200 - 115200 bps
• LED Display = Power/Comms indicator
• Power Input = +10V to +30V dc
• Power Consumption = 0.9W
• Operating Temp. = -25 to +75ºC
• Storage Temp. = -40 to +85ºC
• Humidity = 5 to 95%, non-condensing

user manual