I-7060D Relay Output + isolated digital input Module (4/4),LED

The I-7060D unit provides 4 channels of Power Relay Output (2 with Form A relay, 2 with Form C) and 4 channels of isolated Digital Input.

This "D" variant also provides channel status LED's.

• I-7060(D)/M-7060(D)
  • 2 Form A and 2 Form C Signal Relay Output
  • ±2 kV EFT protection for Power Line
• M-7060P(D)
  • 2 Form A and 2 Form C Power Relay Output
  • ±4 kV EFT protection for Power Line
  • ±3 kV Surge protection for Power Line
• Sink- and Source-type for Digital Input
• Digital Input Channels can be used as 16-bit Counters
• Configurable Power-on Value Settings
• Configurable Safe Value Settings
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Digital Input

• Input Channels : 4
• Input Type : Sink or Source
• Logic level 1: +4V to +30V
• Logic level 0: +1V max
• Input Impedance : 3k ohm, 0.5W
• Counters :
  channels : 4
  Max. Count : 16-bit (65535)
  Max. Input Frequency : 100Hz
  Min. Pulse Width : 5ms
• Optical Isolation : 3750Vrms

Relay Output

• Channels : 4
• Relay Type : Form A x2, Form C x2
• Contact Rating :
  AC : 125V @ 0.6A ; 250V @ 0.3A
  DC : 30V @ 2A ; 110V @ 0.6A
• Operating Time (typical) : 3ms
• Release Time (typical) : 2ms
• Total Switching Time : 10ms
• Surge Strength : 500Vac (50/60Hz)
• Insulation Resistance : 1000MW min. @ 500Vdc

Other

• Interface = RS485
• Format : N,8,1
• Baud Rate : 1200 - 115200 bps
• 1 LED Display as Power/Comms indicator
• 4 LEDs as Digital Input indicators and 4LEDs as Relay Output indicators
• Power Input = +10V to +30V dc
• Power Consumption = 1.9W
• Operating Temp. = -25 to +75°C
• Storage Temp. = -40 to +85°C
• Humidity = 5 to 95%, non-condensing

User Manual