Description
The MDC-700 series is a Modbus Data Concentrator used to access data from disparate Modbus slave devices with a contiguous Modbus address table ranged by the concentrator. Up to 240 Modbus/RTU commands can be performed to read data from Modbus slave devices via RS-232/485, and up to 8 Modbus/TCP masters are allowed to get the polled data via the Ethernet. The Modbus/TCP masters directly read/write the data in the MDC-700 instead of polling each Modbus/RTU slave device one by one. This way not only makes the data on the RS-232/485 sharable to multiple Modbus/TCP master but also shorten the time to read/write data from/to multiple Modbus/RTU slave devices.
Editing the Modbus/RTU commands for accessing the Modbus RTU slaves is simple and convenient with Comma Separated Values (CSV) format. In addition, a web-based user interface is provided to configure the concentrator and remotely monitor the state of the connection of Modbus RTU slaves.
Features
- Web-based user interface
- Easy configuration with .CSV file
- Supports the Modbus RTU master and slave
- Support for up to 8 Modbus TCP masters
- Data pool for up to 9600 registers
- Modbus polling commands for up to 240 definitions
- Upgrade Modbus/RTU devices with Ethernet communication ability
- Speed up the time for reading from multiple Modbus/RTU devices
Specifications
Models | MDC-711 | MDC-714 | MDC-741 |
Ethernet | |||
Port | x1, 10/100 Base-TX | ||
Protocol | Modbus/TCP Slave | ||
Max. Connection | 8 | ||
COM Port | |||
RS-232 | x1, (TXD, RXD, RTS, CTS, GND) | x4, (TXD, RXD, RTS, CTS, GND) | |
RS-485 | x1, (Data+, Data-) | x4, (Data+, Data-) | x1, (Data+, Data-) |
Baud Rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (bps) | ||
Data Format | N81, E81, O81 | ||
Protocol | Modbus RTU Master/Modbus RTU Slave | ||
Max. Node | 32 slaves for each RS-485 port | ||
Polling Definition | 240 definitions for all RS-232/485 ports | ||
Shared Memory | 9600 registers for each of AI, AO, DI and DO data | ||
System | |||
5-Digit 7 Segment LED Display | Yes, to display IP address | ||
System LED Indicator | Yes, to display heartbeat | ||
Mechanical | |||
Dimension (W x H x D) | 102 mm x 125 mm x 28 mm | ||
Installation | Wall Mount | ||
Power | |||
Required Supply Voltage | +10 VDC ~ +30 VDC (non-regulated) | ||
Power Consumption | 2.5 W | ||
Environment | |||
Operating Temperature | -25°C ~ +75°C | ||
Storage Temperature | -30°C ~ +80°C | ||
Humidity |
10 ~ 90% RH, non-condensing |