Description
DIN-rail mounting Power supply with a 24Vdc/1A (24W) rated output and a wide input range. Also includes a relay contact for DC okay indication.
Features
- Universal AC input/Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- NEC class 2 / LPS compliant
- Built in DC OK active signal
- DC OK relay contact
- No load power consumption<0.75W
- 100% full load burn-in test
- 3 years warranty
Specifications
| Input | |
| Voltage range |
85 ~ 264 VAC 120 ~ 370 VDC |
| Frequency range | 47 ~ 63 Hz |
| Efficiency (Typ.) | 84% |
| Leakage current (max.) |
0.55 A/115 VAC 0.35 A/230 VAC |
| Inrush Current (Typ.) |
COLD START 20 A/115 VAC 40 A/230 VAC |
| Leakage current | <1 mA / 240 VAC |
| Output | |
| DC Voltage | 24 VDC |
| Rated Current | 1 A |
| Current Range | 0 ~ 1 A |
| Rated power | 24 W |
| Ripple & noise (max.) Note.2 | 150mVp-p |
| Voltage ADJ. range | 21.6 ~ 26.4 V |
| Voltage Tolerance Note.3 | ±1.0% |
| Line Regulation | ±1.0% |
| Load regulation | ±1.0% |
| Setup, rise Time Note.5 |
500ms, 30 ms/230 VAC 1000ms, 30 ms/115 VAC at full load |
| Hold up time (Typ.) |
50ms/230Vac 20ms/115Vac at full load |
| Protection | |
| Overload | 105 ~ 160% rated output power |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed | |
| Over voltage | 27.6 ~ 32.4V |
| Protection type : Shut down o/p voltage, re-power on to recover | |
| Function | |
| DC OK Active Signal (max.) | 18 ~ 27 V/20 mA |
| Environmental | |
| Working temp. | -20 ~ +70°C (Refer to output load derating curve) |
| Working humidity | 20 ~ 90% RH non-condensing |
| Storage TEMP., humidity | -40 ~ +85°C , 10 ~ 95% RH |
| TEMP. Coefficient | ±0.03%/°C (0 ~ 50°C) |
| Vibration |
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
| Safety & EMC (Note 4) | |
| Safety standards | UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant |
| Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5K VAC |
| Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500 VDC |
| EMI Conduction & Radiation | Compliance to EN55011,EN55022 (CISPR22), EN61204-3 Class |
| Hsrmonic current | Compliance to EN61000-3-2,-3 |
| EMS immunity | Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024,EN61000-6-1,EN61204-3, light industry level, criteria A |
| Others | |
| MTBF | |