NS-200AFT-T 1 port Ethernet + Fibre Switch (ST)


Price:
Sale price£145.00

Description

The NS-200AFT-T is a Ethernet (10/100 Base-TX) to Media (100 Base-FX) converter. The Ethernet supports 10/100M auto negotiation feature and auto MDI/MDI-X function. NS-200AFT-T can work normally from -30 ~ 75°C and accepts a wide voltage range from +12 ~ 48 VDC

Features

  • Automatic MDI/MDI-X crossover for plug-and-play
  • Supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 1.4 Gbps high performance memory bandwidth
  • Frame buffer memory: 256 Kbit
  • 1024 MAC addresses
  • Supports +12 VDC ~ +48 VDC
  • Reverse Polarity Protection
  • Supports operating temperatures from -30 °C ~ +75 °C
  • Multi-mode, ST Connector Fibre supports
  • Slim packaging fits on your DIN-Rail

Specifications

LED Indicators
Status PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ethernet
Ports 1 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 1024
Memory Bandwidth 1.4 Gbps
Frame Buffer Memory 256 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
Fiber
Ports 1 x 100 Base-FX, ST connector
Mode Multi-Mode
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -32 dBm
RX Overload -8 dBm
Budget 12 dBm
Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC (Non-isolation)
Consumption 0.12 A @ 24 VDC
Mechanical
Casing Plastic
Dimensions (mm) 33 x 107 x 78 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

 

Technical

NS-200AF Series Datasheet

Estimate shipping

You may also like

Recently viewed