Description
Measurement Computing's PCI-DIO48H is a high-density, logic-level, digital I/O board for PCI bus compatible computers, offering 48 bits of digital I/O. The board provides the I/O in 24-bit groups based on an 82C55, mode 0 emulation. Each group provides an 8-bit port A and port B, as well as an 8-bit port C that can be split into independent 4-bit port C-HI and a 4-bit port C-LO.
The digital outputs drivers are 74S244 chips and provide 64 mA sink and 15 mA source current capabilities. The input buffers are 74LS373 and offer the high standard input impedance of the 74LS series. On power up and reset, all I/O bits are set to input mode. Like all members of the 74LS series, unconnected inputs will typically float high. If you are using the board to control items that must be OFF on reset, you will need to install pull-down resistors. Provisions have been made on the board to allow users to quickly and easily install SIP resistor networks in either pull-up or pull-down configurations.
The PCI-DIO48H is completely plug-and-play. There are no switches or jumpers on the board. All board addresses are set by your computer’s plug-and-play software.
Features
48 digital I/O
High output drive (64 mA sink/15 mA source)
Based on an 82C55, mode 0 emulation
Software
TracerDAQ® software included for acquiring and displaying data and generating signals
Universal Library includes support for Visual Studio® and Visual Studio® .NET, including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET
Comprehensive drivers for DASYLab® and NI LabVIEW™
Supported by MATLAB® Data Acquisition Toolbox™
InstaCal software utility for installation, calibration, and testing
Supported Operating Systems: Windows® 8/7/Vista®/XP SP2, 32-bit or 64-bit