Description
The PIO-D144LU provides 144 TTL digital I/O lines, consisting of eighteen 8-bit bi-direction ports. The 8-bit ports are named port A (PA), port B (PB), port C (PC) with all ports being configured as inputs upon power-up or reset.
The PIO-D144LU has one D-Sub connector and five 50-pin flat cable connectors. Each header can connect to a 50-pin flat cable, which in turn can be connected to an ADP-37/PCI or ADP-50/PCI adapter. The adapter can then be fixed on the chassis.
Universal PCI so can be installed in 3.3V or 5V bus PCI slots.
Features
- Support the +3.3/+5 V PCI bus
- 144 I/O Lines
- Double side SMT, short card, power saving
- Connect directly to DB-24P,DB-24R, DB-24PR, DB-24SSR, DB-24POR and other OPTO-22 compatible daughter board
- Eighteen 8-bit bi-direction I/O ports
- Emulate 6 Industrial standard 8255 PPI ports (mode 0)
- Programmable interrupt
- Card ID function
- Provide four interrupt sources
- Output status readback
- DIO response time is about 0.77 μs (1.3 MHz max.)
Software
- DOS Lib and TC sample program (with source codes)
- DLL and OCX SDK for Windows 95/98/NT/2K.
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/Vista/7.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
- LabVIEW toolkit for Windows.
- Driver for Linux and DasyLab.
Specifications
|
Programmable Digital I/O |
|
|
Channels |
144 |
|
Digital Input |
|
|
Compatibility |
5 V/CMOS |
|
Input Voltage |
Logic 0: 0.8 V max. |
|
Response Speed |
1.2 MHz (Typical) |
|
Digital Output |
|
|
Compatibility |
5 V/ CMOS |
|
Output Voltage |
Logic 0: 0.1 V max. |
|
Output Capability |
Sink: 6 mA @ 0.33 V |
|
Response Speed |
1.2 MHz (Typical) |
|
General |
|
|
Bus Type |
3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
|
Data Bus |
8-bit |
|
Card ID |
Yes(4-bit) |
|
I/O Connector |
Female DB37 x 1 |
|
Dimensions (L x W x D) |
180 mm x 105 mm x 22mm |
|
Power Consumption |
250 mA @ +5 V |
|
Operating Temperature |
0 ~ 60 °C |
|
Storage Temperature |
-20 ~ 70 °C |
|
Humidity |
5 ~ 85% RH, non-condensing |