Description
The PIO-DA series are multi-channel D/A boards for the PCI bus for PC. The PIO-DA16/8/4/16U offer 16/8/4 channels double-buffered analog output. The output range may be configured in range: ±10V voltage output or 0~20mA current loop sink. The innovative designed improves several drawbacks of the conventional D/A boards. For examples: 1. Jumperless and without trim-pot. 2. The calibration is performed under software control eliminating manual trim-pot adjustments. The calibration data is stored in EEPROM. 3. Each channel can be selected as voltage or current output. 4. High channel count output can be implemented in half size.
The PIO-DA4U Universal PCI card supports both 5V and 3.3V. The PIO-DA4U (Universal PCI Version) is fully compatible with the PIO-DA4 (PCI Version), and also has an improvement in D/I pull-high/low design. The PIO-DA4U cards are designed as direct replacements to the PIO-DA4 cards.
The PIO-DA4U Universal PCI card supports both 5V and 3.3V. The PIO-DA4U (Universal PCI Version) is fully compatible with the PIO-DA4 (PCI Version), and also has an improvement in D/I pull-high/low design. The PIO-DA4U cards are designed as direct replacements to the PIO-DA4 cards.
Note: This card needs a +12V power supply, which can be found in most regular PC's or Industrial PC's.
Includes one CA-4002 D-Sub connector.
Features
- PCI bus interface for PIO-DA16/DA8/DA4
- Universal PCI interface, supports both +5V and +3.3V PCI bus for PIO-DA16U
- Digital input port can be set to pull-high or pull-low for PIO-DA16U
- 16/8/4 channels, 14-bit analog output
- Voltage output range ±10V
- 0~20mA current sink to ground for each converter
- Two pacer timer interrupt source
- Double-buffered D/A latches
- Software calibration
- 16-channel DI, 16-channel DO
- SMD, short card
- One 37-pin D-Sub female connector, two 20-pin flat cable connectors
- Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR
- No base address or IRQ jumper need to set
Software
|
|
Specifications
Analog Output Specifications
- D/A Converter : Quad 14-bit MDAC
- Channels: 16/8/4 Independant (depending on whether PIO-DA16,DA8 or DA4 boards)
- Resolution : 14-bit
- Type: double-buffered, multiplying
- Integral linearity : 0.006% FSR (typical)
- Differential linearity : 0.006% FSR (typical)
-
Voltage output : Range : +10V ~ -10V
Current Drive : ±5mA
Absolute Accuracy : 0.01% FSR (typical) -
Current output : Range : 0 ~ 20mA
Absolute Accuracy : 0.1% FSR (typical)
Excitation Voltage Range : +7V to +40V
Digital I/O
-
Input : 16-channel TTL levels
Low : VIL = 0.8V max., IIL = -0.4mA max
High : VIH = 2.4V min., IIH = 20µA max -
Output : 16-channel TTL levels
Low : VOL = 0.8V max., IOL = 8mA max
High : VOH = 2.4V min., IOH = 0.4mA max
General
- Interface : PIO-DA16/DA4/DA8 is PCI Bus, PIO-DA16U is Universal PCI
-
Power Requirements : PIO-DA16 : +5V@1400mA(Max.)
PIO-DA16U : +5V@1400mA(Max.)
PIO-DA4 : +5V@600mA(Max.)
PIO-DA8 : +5V@800mA(Max.) - Operating temperature : 0~50°C
- Storage temperature : -20~70°C
- Humidity : 0~90% RH, non-condensing
- Dimensions : 180mm x 115mm