PISO-DA2U 2Ch., 12-bit isolated Analog Output Board
Roll over image to zoom in Click on image to zoom
PISO-DA2U 2Ch., 12-bit isolated Analog Output Board

PISO-DA2U 2Ch., 12-bit isolated Analog Output Board

ICP
Price:
£251.00

Description

The PISO-DA2U has 2 analog output channels with high-voltage isolation protection and provides universal PCI interface (3.3 V/5 V). The PISO-DA2U is fully compatible with the PISO-DA2, and thus does not require software or driver modifications.

The PISO-DA2U featuries 3750 VDC bus-typed and channel-channel isolation. The Voltage Ranges available on the PISO-DA2U are +/-10 V, +/-5 V, 0~+10 V and 0~+5 V and the current output ranges are 0 ~ 20 mA and 4 ~ 20 mA.

In addition, the PISO-DA2U also features the following advantages:

  1. Accurate and easy-to-use calibration:
    ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore. The calibration data can be saved in the EEPROM for long-term use.
  2. Channel to channel configuration:
    Each channel can be individually configured as voltage or current output with different output range.
  3. Card ID:
    ICP DAS provides the card ID function for PISO-DA2U. Users can set a card ID for each card so that when more than two boards are used in a computer at the same moment, users can still instantly recognize them one by one.
The PISO-DA2U supports a wide range of operating systems like Linux, DOS, Windows. Also Available are all the DLL's and Active X controls, plus sample programs for Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabView.
 
Includes two CA-PC09M D-Sub connectors.

 

Features

  • Supports both +5 V and +3.3 V PCI bus for PISO-DA2U
  • Two independent 12-bit analog output channels
  • 3750 VDC bus and channels isolation protection
  • 3000 VDC power isolation protection
  • Software calibration
  • Unipolar or bipolar output available from each converter
  • Two pacer timer interrupt source
  • Double-buffered D/A latch
  • The calibration data is fully stored in EEPROM

Software

  • DOS Lib and TC/BC/MSC sample program (source codes included)
  • DLL SDK for Windows 98/NT/2000
  • DLL SDK for 32-bit and 64-bit Windows XP/2003/Vista/7
  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
  • LabVIEW toolkit for Windows.
  • Driver for Linux.

Specifications

Analog Output Specifications

  • Channels: 32 Single Ended 
  • Resolution : 12-bit
  • Conversion Rate : 10 ks/s max.
  • Sampling Rate : 10 ks/s max.
  • Analog output range : Voltage: +/-10 V, +/-5 V, 0 ~ 10 V, 0 ~ 5 V
                                    Current: 0 ~ 20 mA, 4 ~ 20 mA4~20mA
  • Output Driving: +/- 5mA
  • Slew Rate: 0.3V/µS
  • Isolation Voltage : 3750Vdc (bus type, channel to channel)
  • Data Transfer : Software control
  • Accuracy : 0.015% of FSR ± 1/2 LSB @ 25 °C, ± 10 V
  • Output Impedance: 0.1 Ω max

General

  • Bus Type: 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
  • Card ID: Yes, 4-bit
  • I/O Connector : Two 9-pin D-type female connectors 
  • Power Requirements : +5V@1350mA(Max.)
  • Operating temperature : 0~60°C
  • Storage temperature : -20~70°C
  • Humidity : 5~85% RH, non-condensing
  • Dimensions : 189 mm x 98 mm x 22 mm

Technical

PCI Analog Output Boards (Datasheet)

Applications

  • High speed data acquisition system.
  • Harsh environment operation.
  • Signal isolation.

Estimate shipping

You may also like

Recently viewed